Product Description:

The MKD112C-024-KP0-RN belongs to the MKD Synchronous Motors series produced by Bosch Rexroth Indramat. This servo motor converts electrical energy into controlled rotational motion. It is used for positioning and velocity tasks in industrial automation lines, packaging equipment, and machine tools.

At standstill, the motor can deliver a continuous torque of 38.0 Nm, allowing actuators to hold load without overheating during constant-force operation. A centering diameter of 130 mm ensures concentric alignment between the housing and the driven machine shaft, while the square mounting face uses a 192 mm flange to match standard mechanical interfaces. Electrical power is supplied through a dedicated power connector, which simplifies cable routing and keeps the motor connection point clearly separated from surrounding machine hardware. For closed-loop control, the unit employs resolver feedback with an integrated encoder, providing analog sine-cosine signals that remain reliable at high temperatures and speeds. This model is supplied without a holding brake, so the axis must rely on external locking or drive-generated holding torque when power is removed.

All terminations are located on the right side, an orientation that can simplify cable routing when multiple MKD motors share a common tray or conduit path. The rotor couples to the load through a shaft with keyway, providing positive torque transmission for pulleys, pinions, or flexible couplings. Position data are delivered as an absolute (>4096 revs) position value, which lets the control system retain multi-turn reference information after startup. Thermal and electrical behavior is matched to winding code 024, and the assembly uses size 112 with length C to balance torque production with rotor inertia. A fitted shaft seal limits lubricant escape and helps keep dust away from the bearing area during operation.