Product Description:

The MKD112C-024-KG0-LN is a servo motor produced by Bosch Rexroth Indramat as part of the MKD Synchronous Motors series. It works with intelligent drive controllers to convert inverter output into controlled mechanical torque for automated lines and positioning axes. The motor uses size 112 with length code C, giving it a medium frame that balances power density with installation depth. It is suited for general-purpose axis duties where continuous positioning accuracy supports consistent product handling. That combination makes it suitable for packaging, transfer, and other automated equipment that depends on repeatable rotary motion over long operating cycles.

Its continuous torque at standstill reaches 38.0 Nm, allowing the axis to hold static loads and deliver stable low-speed force. A centering diameter of 130 mm aligns the housing with machine reference surfaces, and the flange measures 192 mm across for standard mounting arrangements. This layout supports direct installation on machine elements that need accurate shaft alignment. Power and feedback connectors face to the left, which can simplify cable routing when the control cabinet is located on that side of the machine. Rotor position is monitored through resolver feedback with an integrated encoder, allowing the drive to track position and support stable velocity control.

The housing carries an IP65 protection rating, so dust and water jets are kept away from internal windings and bearings during normal industrial use. Windings are insulated to Class F, which supports winding temperatures up to 155 °C while ambient temperature remains within 0–40 °C. A plain shaft transmits torque directly to couplings or pulleys, and the factory-installed shaft seal helps limit lubricant migration along the journal. Closed-loop positioning accuracy is maintained within ±8 angular minutes, and the absolute position detector can track more than 4096 revolutions without requiring a separate reference switch.