Product Description:

The MKD112C-024-KG0-AN is a servo motor built by Bosch Rexroth Indramat as part of the MKD Synchronous Motors series. It is intended for closed-loop motion axes in automation equipment where repeatable torque delivery and precise speed regulation are needed to drive spindles, linear stages, or indexing tables in production machinery. By combining an integrated feedback element with a compact rotor and stator assembly, the motor converts electrical power from a compatible drive into mechanical rotation that can be coordinated directly with PLC-based control sequences.

This unit can supply a continuous standstill torque of 38.0 Nm, meaning it resists load without overheating when the shaft is held at zero speed. The rectangular mounting flange measures 192 mm, so it matches standard machine layouts that accept the 112 frame size. Electrical behavior is set by winding code 024, which corresponds to the resistance and inductance values expected by the connected drive. Cables exit on side A, making panel routing predictable, and power plus feedback are delivered through an output connector that supports quick connection changes during service. Additional mechanical identifiers include motor size 112 and length code C, which help confirm enclosure depth and installation space.

The centering pilot is 130 mm in diameter, allowing the flange to register concentrically on gearbox or mounting surfaces with minimal runout. Position feedback is provided as absolute feedback for more than 4,096 revolutions, so the controller retains shaft position information after power cycles. A resolver feedback element supplies this data while tolerating vibration and heat. The motor uses a plain shaft, which works with clamping hubs or shrink discs. A shaft seal is fitted to limit lubricant egress, yet the motor is supplied without a holding brake, so applications that need static load retention must use an external clamping device.