MKD112C-024-GP2-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911279073
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKD112C-024-GP2-BN is a servo motor from the MKD Synchronous Motors series with a continuous torque at standstill of 38.0 Nm and a flange size of 192 mm. It features resolver feedback for position detection, IP65 protection, and a shaft with keyway and seal. The motor uses insulation class F and is suitable for ambient temperatures between 0 and 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD112C-024-GP2-BN is a servo motor built by Bosch Rexroth Indramat as part of the MKD Synchronous Motors series. In automated production cells, the motor provides controlled torque and precise shaft positioning so that drives can synchronize conveyor sections, tooling heads, or robotic joints. It is suited for axes that require stable rotary motion, repeatable positioning, and dependable response during changing load conditions.
At stall, the motor delivers 38.0 Nm of continuous torque, giving machines sufficient holding force without additional gearing. A 192 mm square mounting flange matches common machine faces, while winding code 024 indicates the electrical characteristics used by compatible drive systems. The windings use Class F insulation, and the housing has an IP65 rating to help protect internal components from dust and water spray. Size code 112 with length C gives the motor a balanced mechanical envelope for dynamic motion, and the keyed shaft with an internal shaft seal supports direct torque transmission while limiting grease migration. The output connector carries both power and signal lines through one plug, and the encoder supplies rotor angle information to the servo amplifier. The permitted ambient temperature range of 0 to 40 °C supports installation on machinery or inside controlled industrial enclosures.
A 130 mm centering diameter helps seat the motor concentrically in the machine frame for accurate alignment. All connectors are oriented toward Side B, which can simplify cable routing when the motor is mounted with the flange facing the operator side. The integrated resolver feedback (RSF) returns rotor position information after a reference run, and the closed-loop system achieves a full-scale accuracy of ±8 angular minutes for positioning duties on transfer lines, index tables, and medium-tonnage presses. This arrangement supports consistent feedback handling and orderly cable placement in tightly packed machine layouts.
Frequently Asked Questions about MKD112C-024-GP2-BN:
Q: What type of encoder is used on the MKD112C-024-GP2-BN servo motor?
A: The MKD112C-024-GP2-BN features resolver feedback (RSF) for position detection, offering relative position feedback.
Q: What is the continuous torque at standstill for the MKD112C-024-GP2-BN?
A: This motor provides a continuous standstill torque of 38.0 Nm.
Q: What shaft design does the MKD112C-024-GP2-BN include?
A: The MKD112C-024-GP2-BN has a shaft with keyway and a shaft seal installed for added protection against dust and moisture.
Q: What is the protection rating of the MKD112C-024-GP2-BN motor?
A: This servo motor meets the IP65 protection category, offering full dust-proofing and protection against low-pressure water jets.
Q: What is the permissible ambient temperature range for the MKD112C-024-GP2-BN?
A: The recommended ambient temperature range for operating this motor is between 0°C and 40°C.
