MKD112C-024-GG3-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911283537
The Bosch Rexroth Indramat MKD112C-024-GG3-BN is a servo motor from the MKD Synchronous Motors series with a continuous torque at standstill of 38 Nm and a holding brake torque of 70 Nm. It features a resolver feedback encoder, plain shaft with seal, and a 192 mm flange size. The motor has a centering diameter of 130 mm and an output connector on side B.
Internal Product Review
The MKD112C-024-GG3-BN is a servo motor from the MKD Synchronous Motors series by Bosch Rexroth Indramat, featuring a continuous torque at standstill of 38.0 Nm and equipped with a 70 Nm holding brake for secure load retention. This model uses resolver feedback (RSF) for relative position detection and offers a plain shaft with an integrated shaft seal for reliable performance. The combination of holding brake torque and feedback system makes this servo motor well-suited for demanding automation tasks.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD112C-024-GG3-BN is a servo motor produced by Bosch Rexroth Indramat and belongs to the MKD Synchronous Motors series. Designed for closed-loop drive systems, the unit converts electrical power from a compatible drive into controlled mechanical rotation for positioning tasks on packaging lines, material-handling gantries, and machining centers. Its integrated feedback and brake support accurate speed control, repeatable positioning, and secure stopping when an axis must remain in place. Because motion feedback is built into the motor housing, the drive can monitor rotor movement continuously and correct load-related deviations during operation. The motor is intended for applications where accurate synchronization and predictable axis behavior are more important than simple open-loop rotation.
Its centering pilot diameter of 130 mm aligns the stator housing with the machine frame, while the square flange pattern spans 192 mm for face mounting. At standstill, the motor can deliver a continuous torque of 38.0 Nm, which supports static loads such as vertical axes. The stator frame is size 112, balancing torque density with heat dissipation in the MKD family. Rotor position is transmitted to the controller by resolver feedback (RSF), which produces sine and cosine reference signals for commutation. That feedback method is well suited to motion systems that need stable position signals under electrical noise and varying operating speeds. Power and feedback cables exit on Side B through an output connector to simplify routing in compact machine layouts.
An integrated brake supplies 70 Nm of holding torque, allowing the shaft to remain locked when power is removed. The length code C increases the active stack length without changing the mounting footprint, and the shaft uses a plain shaft design for direct coupling to suitable hubs. Winding code 024 sets the voltage constant and current values used by compatible Indramat drives. A shaft seal is fitted to help reduce oil or coolant ingress, and the resolver supports relative position detection so the controller can perform homing after startup. This layout suits machines that combine frequent indexing with power-off holding and require protection around the drive-end bearing area.
