MKD112B-073-KP1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911271289
The Bosch Rexroth Indramat MKD112B-073-KP1-BN is a servo motor from the MKD Synchronous Motors series and features resolver feedback with an integrated encoder for absolute position detection over more than 4096 revolutions. It has a continuous torque at standstill of 28.0 Nm, comes with a 22 Nm holding brake, and is rated at insulation class F with IP65 protection. The motor includes a 192 mm flange size, a centering diameter of 130 mm, and a shaft with keyway and seal.
Internal Product Review
The MKD112B-073-KP1-BN servo motor delivers accurate motion control with resolver feedback and absolute position detection. Continuous standstill torque of 28.0 Nm and a 22 Nm holding brake support stable axis positioning under load. IP65 protection and a shaft seal make the unit a strong choice for demanding industrial installations.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD112B-073-KP1-BN belongs to the MKD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is a servo motor intended for closed-loop positioning and speed regulation on automated machinery such as gantry axes, presses, and packaging stations. By combining resolver-based feedback with an integrated encoder, the unit supplies real-time rotor data to a drive controller so that commanded motion profiles can be executed with minimal following error. This feedback arrangement helps the drive correct load-related deviations during acceleration, deceleration, and steady-speed operation.
The motor’s centering pilot of 130 mm keeps the stator concentric with adjacent mechanical frames, while a flange size of 192 mm provides standardized mounting points. During continuous operation, the rotor can deliver 28.0 Nm of torque without overheating, making it suitable for medium-load duty cycles. An enclosure rating of IP65 shields the internal windings from dust ingress and low-pressure water jets, allowing direct installation outside a cabinet. System accuracy is specified at ±8 angular minutes. This value reflects the combined mechanical and electrical tolerance the drive can maintain during interpolated motion.
The unit is equipped with a holding brake that clamps the shaft with 22 Nm of static torque, preventing drift when power is removed. Class F insulation allows the stator winding to withstand temperatures up to 155 °C, and the motor can run at ambient temperatures from 0–40 °C without derating. Absolute position tracking over >4096 revs eliminates homing cycles after each startup. Connections exit on side B through an output connector, which helps simplify cable routing along the machine frame. The B-length housing and size 112 frame balance inertia with peak torque, while the keyed shaft, shaft seal, and resolver feedback support stable mechanical integration.
