MKD112B-073-GP1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911276444
The Bosch Rexroth Indramat MKD112B-073-GP1-BN is a servo motor from the MKD Synchronous Motors series, featuring a 192 mm flange size and a centering diameter of 130 mm. It provides a continuous torque of 28.0 Nm at standstill, includes a holding brake with 22 Nm torque, and offers resolver feedback. The motor supports IP65 protection, has insulation class F, and uses a shaft with keyway design.
Internal Product Review
The MKD112B-073-GP1-BN is a Bosch Rexroth Indramat servo motor with resolver feedback. Continuous standstill torque of 28.0 Nm and IP65 protection support dependable axis control in demanding machine environments. A 22 Nm holding brake adds secure stopping performance, making the motor a strong choice for precise industrial motion.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD112B-073-GP1-BN is a servo motor manufactured by Bosch Rexroth Indramat for the MKD Synchronous Motors series. Intended for closed-loop automation axes, it converts inverter output into precise rotary motion for tooling, handling, and packaging equipment. The motor uses frame size 112 with medium length code B, giving a balanced power-to-weight ratio for mid-frame installations. Power and feedback leads exit on side B through an output connector, and relative position data is returned to the drive by resolver feedback for incremental positioning. Its synchronous design allows the connected drive to regulate torque quickly during starts, stops, and speed changes.
A continuous standstill torque of 28.0 Nm represents the thermal steady-state load the unit can withstand without additional cooling. The mounting interface follows a 192 mm flange size and a 130 mm centering diameter, enabling direct coupling to gearboxes or machine frames with low radial runout. These mounting dimensions let the motor seat accurately against mating surfaces and support consistent shaft alignment. Protection is rated at IP65, so dust and low-pressure water jets cannot reach live parts, while the windings use F-class insulation that tolerates temperatures up to 155 °C. A radial shaft seal helps preserve the ingress rating and reduces lubricant loss during continuous duty.
For static axis retention, the integrated holding brake supplies 22 Nm of clamp force whenever power is removed, preventing vertical loads from drifting. The drive end features a shaft with keyway, allowing rapid alignment with standard hubs instead of relying only on friction fittings. Operation is specified within a 0–40 °C ambient range, which matches common machine and cabinet conditions while helping protect bearing grease viscosity. During commanded moves, the resolver-drive loop achieves a system precision of ±8 angular minutes, which is suitable for indexing, pick-and-place work, and synchronized conveyor applications that require repeatable motion. The brake and keyed shaft make the motor practical for axes that must hold position at rest and then transmit torque cleanly when motion resumes.
