Product Description:

The MKD112B-048-KP1-BN belongs to the MKD Synchronous Motors series manufactured by Bosch Rexroth Indramat. As a servo motor, it is installed in automated machinery where precise, closed-loop rotary motion is required, allowing a drive controller to position loads accurately and repeatably across multiple duty cycles in packaging, material-handling, and metal-cutting equipment. It is commonly used in motion systems where stable torque control and accurate position feedback are needed during repeated starts, stops, and speed changes.

This model produces a continuous standstill torque of 28.0 Nm, giving the axis enough stall force to hold loads without overheating. When power is removed, the integrated holding brake supplies 22 Nm of mechanical locking torque for static load retention. Mechanical mounting is centered by a 130 mm pilot diameter and secured with a square flange measuring 192 mm, so the motor can align with common machine interfaces. The motor is built in length code B and size 112, and it carries winding code 048, which sets the phase resistance and inductance expected by compatible Indramat drives. A shaft seal keeps lubrication inside and contaminants out, while the output power and feedback lines are routed through an output connector.

Feedback and cabling are directed on Side B of the housing so the motor can be mounted flush on the opposite face without sharply bending conductors. Motion feedback is handled by a resolver feedback device that supplies absolute rotor angle information over more than 4096 revolutions, eliminating the need for homing after power cycles. Mechanical power is transferred through a shaft with a keyway for secure, slip-free coupling to pulleys or couplings. This connector layout supports clean cable routing in compact machine frames and helps reduce stress at the cable exit point.