Product Description:

The MKD112B-024-KP2-AN is a servo motor manufactured by Bosch Rexroth Indramat for the MKD Synchronous Motors series. Serving as an electromechanical actuator, it converts regulated three-phase power from a drive controller into precise rotary motion for packaging lines, pick-and-place systems, and other automated stations. Its closed-loop feedback and medium-frame construction allow accurate velocity changes and repeatable positioning while fitting into installations that cannot accommodate larger motors, and the standardized flange interface lets OEMs integrate the unit with minimal custom hardware.

At standstill, the motor supplies a continuous torque of 28.0 Nm, providing sufficient holding force without external brakes. The centering shoulder measures 130 mm, ensuring concentric alignment between the housing and the machine plate, while a square flange of 192 mm mates with IEC mounting kits. Power and feedback are routed through an output connector installed on side A, keeping cables on the same side as the drive cabinet. Rotor position is measured by integrated resolver feedback, enabling rapid current loops even in electrically noisy environments. The B-length lamination stack and size 112 frame give moderate inertia and steady thermal dissipation for production cycles that alternate between acceleration and dwell.

For absolute motion control, the onboard electronics extend the resolver signal to support Absolute (>4096 revs) multi-turn position reporting, removing the need for homing routines after power loss. Output torque is transmitted through a shaft with keyway, locking pulleys or couplings against slip during reversals. Electromagnetic parameters are set by the 024 winding code, so the motor pairs with drive modules calibrated for that resistance and inductance set. A radial shaft seal blocks dust and coolant from the front bearing, and the specified wiring direction helps maintain the enclosure’s protection rating.