MKD112B-024-KP1-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911277859
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKD112B-024-KP1-AN is a servo motor from the MKD Synchronous Motors series. It features a 28.0 Nm continuous torque at standstill and comes with a resolver feedback with integrated encoder for position detection above 4096 revolutions. The motor is equipped with a 192 mm flange, side A output connector, and has a shaft with keyway and holding brake torque of 22 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD112B-024-KP1-AN is a servo motor built by Bosch Rexroth Indramat and supplied within the MKD Synchronous Motors series. It is intended for closed-loop industrial drives where precise velocity and position regulation are required for packaging lines, gantry axes, and similar machine tools that depend on repeatable motion during continuous production. By integrating the motor, encoder, and factory-mounted brake into one assembly, the unit can be wired directly to the associated digital drive controller and used as a compact electromechanical actuator.
This motor delivers a continuous standstill torque of 28.0 Nm, allowing it to hold load torque without overheating during static phases. Installation is simplified by a 130 mm centering diameter that matches standard mounting pilot holes, while the square flange measures 192 mm across to accept ISO-pattern fasteners and provide a stable mounting surface. Rotor position is monitored through resolver feedback, which sends angle information to the drive for closed-loop control. An integrated brake supplies 22 Nm of static holding torque so that vertical or suspended loads remain fixed when power is removed. Side-A cable routing and an output connector interface keep motor leads on one face of the housing, and a shaft seal helps keep contaminants away from the front bearing.
Winding code 024 sets the resistance and inductance values used by the matching drive for current loop tuning. With a frame size of 112, the motor has a mechanical envelope suited to moderate indexing duty, and absolute position detection spans more than 4096 revolutions so multi-turn feedback is retained after power cycles without a battery. Torque is transferred through a shaft with keyway, which helps prevent coupling slip under repeated start-stop operation. The B length code increases stack depth to raise continuous power, and the shaft seal supports use in areas where coolant splash or fine dust could otherwise reach the front bearing.
Frequently Asked Questions about MKD112B-024-KP1-AN:
Q: What type of encoder does the MKD112B-024-KP1-AN motor use for feedback?
A: The MKD112B-024-KP1-AN motor uses resolver feedback with an integrated encoder for precise position detection.
Q: What is the holding brake torque on the MKD112B-024-KP1-AN?
A: This motor features a holding brake with a torque of 22 Nm.
Q: What shaft design does the MKD112B-024-KP1-AN motor provide?
A: The shaft of the MKD112B-024-KP1-AN model is designed with a keyway.
Q: What is the continuous standstill torque specification for the MKD112B-024-KP1-AN?
A: The continuous torque at standstill for this motor is rated at 28.0 Nm.
Q: How is position detection achieved on the MKD112B-024-KP1-AN motor?
A: The MKD112B-024-KP1-AN features absolute position detection over more than 4096 revolutions.
