Product Description:

The MKD112B-024-KP0-AN is a servo motor produced by Bosch Rexroth Indramat for the MKD Synchronous Motors series. As a rotary drive component, it converts commanded current into motion for positioning tasks in automated machinery and delivers controlled torque to the driven load. Internal feedback hardware gives the connected drive real-time rotor angle data so closed-loop systems can maintain programmed trajectories during acceleration, steady running, and stopping. This operating behavior suits coordinated axes that require repeatable motion, stable speed control, and accurate position regulation under changing load conditions.

The motor develops a continuous standstill torque of 28.0 Nm, providing steady force for static loads and low-speed duty cycles. A flange diameter of 192 mm and a centering diameter of 130 mm align the motor face to mating gearboxes or mounting surfaces for accurate installation. The 024 winding is used in the motor length B housing and the size 112 frame, giving a balanced combination of thermal mass and dynamic response for servo duty. Integrated resolver feedback is routed through an output connector on Side A, which allows power and signal connections to leave the motor in the same general direction.

The motor also supports absolute position detection (>4096 revs), allowing multiturn tracking after power-up without a homing cycle. This helps the drive retain position information across extended shaft rotation and supports applications where restart time must be kept short. It is supplied with no holding brake, so power-off load retention must come from external locking hardware or from drive-applied torque where the machine permits it. Torque is transferred through a keyed shaft, and a front shaft seal helps limit lubricant migration and contamination at the bearing.