MKD112B-024-GP0-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911272636
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKD112B-024-GP0-BN is a servo motor from the MKD Synchronous Motors series with a flange size of 192 mm and a centering diameter of 130 mm. It has a continuous torque at standstill of 28.0 Nm and uses resolver feedback for position detection. The motor features a shaft with a keyway and includes a shaft seal, with the connection located on Side B via an output connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD112B-024-GP0-BN is a three-phase AC servo motor built by Bosch Rexroth Indramat within the MKD Synchronous Motors series. This model is intended for direct coupling to Rexroth digital drive controllers so that precise torque and speed commands can be executed without lag. In industrial automation, the unit supplies regulated rotary motion for indexing tables, gantry drives, and feed axes where acceleration and repeatable positioning are required. Its electromechanical design follows the manufacturer’s modular concept, supporting consistent integration with standardized cabling and feedback hardware.
The motor delivers 28.0 Nm of continuous holding torque when the shaft is motionless, giving the drive margin to counter process loads without overheating. A mounting interface with a 192 mm flange lets the housing bolt to machine frames, while the 130 mm centering diameter keeps the pilot concentric with the mating surface. Position data is transmitted through resolver feedback (RSF), a transformer-based sensor that supplies absolute angular information even at low speed and helps reject electrical noise. Power and feedback leads exit on side B, and the connector on that face supports straightforward cable routing.
Mechanical coupling is simplified by a shaft with a keyway, giving the motor a positive drive interface for pulleys or gear hubs. A shaft seal is fitted, so lubricant ingress is blocked at the bearing seat during washdown cycles. Inside the stator, winding set 024 sets the electrical resistance and inductance profile used for mid-range speed operation on 300 V class inverters. The frame designation 112 and length code B give the motor a compact package that balances inertia and thermal capacity. The motor uses relative position detection, which relies on incremental counts derived from resolver excitation rather than built-in multi-turn memory.
Frequently Asked Questions about MKD112B-024-GP0-BN:
Q: What is the continuous torque at standstill of the MKD112B-024-GP0-BN motor?
A: The MKD112B-024-GP0-BN provides a continuous torque at standstill of 28.0 Nm.
Q: What type of encoder and position detection does the MKD112B-024-GP0-BN use?
A: This motor uses resolver feedback (RSF) to supply relative position detection.
Q: What is the shaft design of the MKD112B-024-GP0-BN motor?
A: It features a shaft with keyway and comes equipped with a shaft seal.
Q: How is the electrical connection configured on the MKD112B-024-GP0-BN?
A: The electrical connection of this model is located on Side B via an output connector.
Q: What are the centering diameter and flange size of the MKD112B-024-GP0-BN?
A: The centering diameter is 130 mm with a flange size of 192 mm for mounting.
