Product Description:

The MKD112A-058-KP1-BN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MKD Synchronous Motors series. It is intended to drive automated axes that require repeatable position and speed control, such as gantry stages, packaging machinery, or material-handling stations. By combining a permanent-magnet rotor with position feedback, the unit supplies closed-loop torque that aligns with the demands of industrial motion controllers. This allows the motor to respond quickly to changing commands while maintaining stable motion during continuous production cycles.

At mechanical standstill, the motor can deliver a continuous torque of 15.0 Nm, giving machinery enough steady force to hold or index loads without overheating. When power is removed, the integrated holding brake produces up to 22 Nm to secure vertical or suspended axes. Installation is guided by a centering pilot of 130 mm, and the mounting flange spans 192 mm, allowing direct coupling to standard IEC adapter plates. Power and feedback conductors exit on the rear housing because the connection hardware is oriented toward Side B, and all terminations are brought out through a rugged output connector. This rear-facing cable layout helps keep leads away from the shaft end and can simplify routing in enclosed machine spaces.

The integrated sensor uses resolver feedback so the drive can track rotor angle under vibration and electrical noise that would disturb optical encoders. Absolute position reporting over more than 4096 revs eliminates homing cycles after power-up, which shortens machine start times. Torque is transmitted through a hardened shaft with a keyway, which helps prevent slip during reversing and acceleration. A true shaft seal restricts dust or coolant ingress and supports long service intervals in production environments.