MKD112A-024-GP0-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911291476
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKD112A-024-GP0-AN is a servo motor from the MKD Synchronous Motors series with a continuous torque at standstill of 15.0 Nm and an insulation class F. It features a 192 mm flange size, 130 mm centering diameter, and an IP65 protection category. The motor comes with resolver feedback for position detection and has a shaft with keyway and shaft seal, but does not include a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD112A-024-GP0-AN is a servo motor built by Bosch Rexroth Indramat for the MKD Synchronous Motors series. It converts electrical power into controlled rotary motion for positioning or speed-regulated axes in automated machines. The sealed housing allows installation on production lines without additional covers, and the unit connects through an output connector on side A of the stator. This arrangement suits packaging, transfer, and general handling equipment that requires stable motion and compact motor integration.
This motor delivers a continuous standstill torque of 15.0 Nm, so it can maintain load torque at zero speed through the drive during normal operation. A centering diameter of 130 mm aligns the flange with machine frames and helps reduce runout. Rotor position is reported by resolver feedback, giving rotor angle information for closed-loop drives. The enclosure sealing is rated IP65, which blocks dust and low-pressure water jets. Operation is specified for ambient temperatures from 0–40 °C, matching typical factory floor conditions. The winding insulation uses Class F materials for temperatures up to 155 °C.
A flange size of 192 mm spreads mounting forces across larger gearboxes or machine plates, while system accuracy is limited to ±8 angular minutes, supporting moderate precision indexing. The stator uses winding code 024, which must match the connected drive amplifier. Mechanical power is transmitted through a shaft with keyway, which simplifies coupling to standard pulleys or gears, and a shaft seal limits lubricant migration along the journal. That shaft arrangement also supports direct connection to common machine elements without special adapters. This A-length, size 112 frame motor is supplied without a holding brake, so an external locking device is needed if the load must remain fixed during shutdown.
Frequently Asked Questions about MKD112A-024-GP0-AN:
Q: What is the continuous torque at standstill for the MKD112A-024-GP0-AN motor?
A: The MKD112A-024-GP0-AN provides a continuous torque of 15.0 Nm at standstill.
Q: What type of encoder does the MKD112A-024-GP0-AN utilize?
A: This motor is equipped with resolver feedback (RSF) for position detection.
Q: What shaft design does the MKD112A-024-GP0-AN have?
A: The MKD112A-024-GP0-AN features a shaft with keyway and includes a seal.
Q: Does the MKD112A-024-GP0-AN include a holding brake?
A: This model is made without a holding brake.
Q: What is the protection rating of the MKD112A-024-GP0-AN motor?
A: The MKD112A-024-GP0-AN offers IP65 protection, making it dust tight and protected against water jets.
