Product Description:

The MKD093C-058-GG0-AF is a servo motor manufactured by Bosch Rexroth Indramat as part of the MKD Synchronous Motors series. Within an automation cell, it converts commanded drive current into rotary motion for positioning axes and coordinated machine functions. It supplies the mechanical output needed for closed-loop motion in packaging, handling, and similar automated systems. The C-length housing gives the motor a medium frame profile that supports stable torque production without requiring excessive installation space.

Its electrical terminations face Side A and are supplied through an output connector, which helps simplify cable routing in tight cabinets and along machine frames. Rotor position is returned to the controller through resolver feedback, allowing continuous vector control during acceleration, deceleration, and steady-speed operation. The housing meets the IP65 rating, so internal components remain protected from dust and low-pressure water jets in production areas. The motor is delivered without a holding brake, so static load retention must be provided by external mechanics or drive-controlled torque. Winding code 058 determines the electrical characteristics expected by matching drive electronics, and the cabling arrangement supports the relative position feedback method used by this motor.

The stator windings use Class F insulation, which supports elevated internal temperatures during normal operation. The motor uses a plain shaft, and an internal radial lip seal helps retain lubricant and reduce contaminant entry at the shaft passage. Dimensional conformity and magnetic design provide system accuracy of ±8 angular minutes, which helps maintain repeatable positioning in indexing tables and similar motion axes. Continuous operation is permitted in ambient temperatures of 0–40 °C without derating when surrounding airflow is adequate for the expected heat loss. This operating range supports steady use in enclosed machine spaces where thermal conditions remain controlled.