Product Description:

The MKD093C-035-GG0-BF is a servo motor manufactured by Bosch Rexroth Indramat for the MKD Synchronous Motors series. As a brushless rotary actuator, it converts drive current from a digital controller into precise torque for indexing tables, packaging axes, and material-handling gantries. Its 093 frame size and length code C provide mid-range torque density while keeping the motor compact enough for modular machine layouts. When paired with a compatible drive, it supports accurate starts, stops, and controlled speed changes during repetitive motion cycles.

Power and feedback conductors exit on side B through an output connector, simplifying cable routing where the motor is mounted close to guide rails or guarding. Rotor angle is reported through resolver feedback, allowing the control loop to remain stable in electrically noisy environments. The winding system uses Insulation class F, so the stator can withstand operating temperatures up to 155 °C before insulation limits are approached. winding code 035 sets electrical values matched to 300 V-class drives. Under these conditions, the drive-motor pair can achieve repeatability within ±8 angular minutes, which suits positioning tasks that require consistent motion from cycle to cycle.

The housing and motor connectors meet IP65, which helps keep out dust and water jets found around washdown equipment. Continuous service is permitted at ambient temperatures from 0–40 °C, so the motor fits typical indoor industrial conditions without separate cooling hardware. A plain shaft with an integral shaft seal provides a smooth coupling surface for clamp hubs while helping limit contaminant entry. Because the feedback is interpreted as relative position data, the axis requires a reference routine at startup, and a separate brake must be used if the load has to remain fixed with power removed.