MKD090B-035-GP0-KN-SA001
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat MKD090B-035-GP0-KN-SA001 is a servo motor from the MKD Synchronous Motors series, featuring resolver feedback for position detection and a continuous torque at standstill of 12.0 Nm. It is built with a 140 mm flange size, 110 mm centering diameter, and a shaft with keyway.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD090B-035-GP0-KN-SA001 is a servo motor manufactured by Bosch Rexroth Indramat within the MKD Synchronous Motors series. With size code 090 and length designation B, it suits medium-frame automation axes that need permanent-magnet torque under drive control. In industrial cells the unit translates inverter current into precise rotary motion, enabling coordinated positioning on packaging, handling, and metal-working equipment.
The motor can supply a continuous standstill torque of 12.0 Nm, delivering stable holding force without thermal overload when the shaft is locked. Installation follows the IEC square mounting interface because the flange is 140 mm across, and axial centering is maintained by a 110 mm pilot diameter for concentric alignment with gearboxes or frames. Feedback is generated by a Resolver feedback (RSF) transducer, giving analogue sine-cosine signals that remain immune to high temperatures and electrical noise. Power and signal exit on Side B, which places the terminal hardware opposite the driven machine and simplifies cable routing in compact cabinets. Within the MKD mechanical coding the stator uses winding code 035 to match inductance and back-EMF to standard drives.
These electromagnetic and geometric attributes integrate with installation features that complete the mechanical envelope. Field wiring enters through a connection box, allowing shield termination and strain relief on the housing itself. Because the rotor is equipped with a shaft with keyway, torque transmission to pulleys or couplings can be achieved without custom hubs, and a factory-installed shaft seal blocks lubricant ingress from adjoining gear stages. The unit is supplied without a holding brake, so static position retention must be provided by the drive or an external clamp when power is removed. Relative position detection, combined with the resolver’s electrical angle, satisfies indexing axes that are homed at start-up.
