Product Description:

The MKD071B-097-KP0-BN is a servo motor produced by Bosch Rexroth Indramat and assigned to the MKD Synchronous Motors series. In automated handling, packaging, and machining stations, this motor converts commanded drive currents into rotary motion that can be regulated for speed and position. Its integrated resolver and absolute position capability give the connected drive controller real-time rotor data for coordinated multi-axis tasks. This arrangement supports precise indexing, synchronized motion, and repeatable starts and stops in production equipment.

The motor can hold a static load with 8.0 Nm of continuous standstill torque, allowing gears or belts to remain under tension during dwell periods. A centering pilot of 95 mm aligns the housing concentrically with the machine frame, while the square mounting flange measures 115 mm on each side for common machine interfaces. Power, encoder, and protective earth conductors exit on Side B, which helps keep cable routing organized when several axes are installed close together. The motor uses an output connector rather than fixed terminals, supporting quick connection and shielding continuity through prefabricated cabling.

The motor has length code B, which indicates a medium housing depth, and size code 071, which corresponds to the stator diameter used across the family. Motion feedback is provided by resolver feedback; this electromechanical sensor supplies analog sine-cosine signals that the drive interpolates to yield absolute (>4096 revs) multi-turn position information at power-up. For applications that already incorporate external brakes or rely on drive torque to maintain rest positions, the unit is delivered without a holding brake. Torque is transmitted through a shaft with keyway, and a shaft seal keeps lubricant inside the bearing cavity while helping block airborne contaminants from entering the enclosure.