Product Description:

The MKD071B-097-KG0-AN is a servo motor produced by Bosch Rexroth Indramat for the MKD Synchronous Motors series. With its 115 mm mounting flange and 95 mm centering pilot, the unit fits mid-frame machinery where compact axes must deliver repeatable motion. The motor drives automated tools, pick-and-place heads, and packaging actuators by converting controlled electrical energy into precise rotary movement for closed-loop industrial positioning tasks.

The stator can produce a continuous standstill torque of 8.0 Nm, giving stable output for holding or slowly indexing a load without overheating. A flange diameter of 115 mm sets the bolt circle that mates to gearboxes or direct-drive plates, while the 95 mm centering shoulder aligns the housing concentrically to the driven element. Power and feedback leave the housing on Side A through an output connector, simplifying cable routing inside tight cabinets. The motor is sealed to IP65, so dust and low-pressure water jets do not compromise the windings. Class F insulation supports winding temperatures up to 155 °C, and the resolver feedback system supplies absolute rotor angle data beyond 4096 revolutions for high-resolution commutation.

The motor operates in ambient temperatures from 0–40 °C, allowing direct installation in standard factory areas without additional cooling. Integrated electronics report position with a total system accuracy of ±8 angular minutes, and the embedded Resolver feedback removes the need for external encoder mounting. A Plain shaft transmits torque without keyways to minimize backlash in clamp couplings. The design omits a holding brake, so static load retention must be managed by external mechanics or the drive itself. A shaft seal is fitted to block coolant splash, and the B-length, 071-frame geometry keeps mass and inertia moderate for dynamic duty cycles.