Product Description:

The MKD071B-097-GG1-BN is a servo motor manufactured by Bosch Rexroth Indramat in the MKD Synchronous Motors series. This brushless unit converts drive current from a matching power module into precise rotary motion for axes that require coordinated velocity and position control in automated machinery such as packaging stations and small transfer lines. By integrating feedback electronics and a brake inside a sealed housing, the motor supports closed-loop performance while reducing the need for separate external components. This arrangement lets the connected drive regulate motion on compact machine axes without adding external feedback hardware.

The motor uses a centering pilot of 95 mm, which aligns the stator flange concentrically with the machine frame to help minimize radial runout. Its square mounting flange measures 115 mm, so it fits common bolt patterns used on mid-sized positioning tables and similar mounting plates. When energized, the rotor can sustain 8.0 Nm of continuous standstill torque, allowing static holding or low-speed feed without overheating. Resolver feedback provides sine-cosine signals for real-time current vector control, and the cast-aluminum enclosure is rated IP65 to resist dust ingress and low-pressure water jets during washdown.

An internal brake provides 5 Nm of torque to help prevent drift on vertical axes when power is removed. The motion loop can be tuned to within ±8 angular minutes of commanded position because the resolver supports relative position detection. The motor operates in ambient temperatures from 0 to 40 °C, and the windings use F-class insulation to withstand normal thermal rise. Power and feedback lines exit on side B through an output connector, which helps simplify cable routing when service access is from the front. A plain shaft with a factory-installed seal helps keep lubricant in and washdown fluid out, and the size 071 body with length code B keeps rotor inertia suitable for mid-range servo drives.