Product Description:

The MKD071B-061-KP1-KN/S007 is a servo motor produced by Bosch Rexroth Indramat within the MKD Synchronous Motors series. It provides closed-loop torque and velocity control to machine axes, pick-and-place gantries, and packaging equipment throughout industrial automation. A factory-installed keyway shaft couples directly to gearboxes or timing pulleys, while the integrated resolver sends position data to the drive so the controller can synchronize motion with neighboring axes. Because the feedback device is built into the motor, the drive can monitor rotor position and speed without adding external sensing hardware.

At standstill, the motor can produce a continuous torque of 8.0 Nm, which supports stable holding force when the axis is controlled by the drive. For emergency stops or gravity-loaded vertical axes, a mechanical holding brake rated at 5 Nm is mounted at the rear of the frame. Interface dimensions use a 115 mm square flange and a 95 mm centering diameter, allowing the housing to mount on standard adapters. Power and sensor conductors enter from side B through a sealed connection box, and the IP65 enclosure helps keep out dust and low-pressure water. Winding code 061, insulation class F, motor length B, and size 071 identify the motor's electromagnetic and thermal design. A keyed shaft and an installed shaft seal support torque transmission while protecting the bearing cavity.

The feedback system provides absolute position over more than 4096 revolutions, and the drive reads its analog signals through resolver feedback to achieve a system precision of ±8 angular minutes. This level of accuracy suits indexing tables, gluing stations, and other axes that require repeatable rotary alignment. The motor remains within thermal limits from 0 to 40 °C when adequate airflow is present. It also supports assembly, inspection, and light machining applications that rely on consistent servo motion and repeatable axis response.