MKD071B-061-KP0-KN-SA001 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R985000307
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKD071B-061-KP0-KN-SA001 is a servo motor from the MKD Synchronous Motors series with a flange size of 115 mm and a centering diameter of 95 mm. It features resolver feedback with an integrated encoder, delivers a continuous torque of 8.0 Nm at standstill, and comes with a shaft incorporating a keyway and shaft seal. The connection is made via a connection box on Side B, and the motor does not include a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MKD071B-061-KP0-KN-SA001 is a servo motor in the MKD Synchronous Motors series that interfaces with digital drives for precise rotary positioning tasks. Built for general-purpose automation, it converts commanded current into regulated mechanical torque while supplying real-time rotor angle information back to the controller. In packaging, material handling, or light machine-tool axes, the unit provides continuous motion control so loads are indexed, clamped, or synchronized with neighboring processes at repeatable speeds.
This model delivers a continuous standstill torque of 8.0 Nm, allowing it to hold or slowly accelerate inertial loads without thermal overload. Mounting follows an IEC square flange that measures 115 mm, while a 95 mm centering diameter guides the motor into the mating housing to keep the shaft concentric. The stator uses winding code 061, which corresponds to resistance and inductance values that must match the drive current limits. Position feedback is supplied by integrated resolver feedback, giving analog sine-cosine signals that the controller uses for rotor position. Power, signal, and protective earth leads exit on Side B through a sealed connection box, simplifying routing inside a cabinet or cable track.
The rotor uses a shaft with a keyway, and a factory-installed shaft seal helps keep coolant splash away from the bearing cavity. The motor is supplied without a holding brake, so any static load must be secured by drive torque or an external clamp when power is removed. It also includes absolute position detection over more than 4,096 revolutions, so position data remain available after shutdown. This arrangement supports consistent restart positioning in the 071 frame with B-length construction, Side B cable exit, and resolver-based sensing.
Frequently Asked Questions about MKD071B-061-KP0-KN-SA001:
Q: What type of encoder does the MKD071B-061-KP0-KN-SA001 motor utilize?
A: The MKD071B-061-KP0-KN-SA001 servo motor uses resolver feedback with an integrated encoder for position detection.
Q: What is the continuous standstill torque rating for the MKD071B-061-KP0-KN-SA001?
A: This servo motor delivers a continuous standstill torque output of 8.0 Nm.
Q: What kind of shaft design does the MKD071B-061-KP0-KN-SA001 have?
A: The shaft on the MKD071B-061-KP0-KN-SA001 features a keyway and seal for secure coupling and added protection.
Q: Is a holding brake included with the MKD071B-061-KP0-KN-SA001 motor?
A: This model does not include a holding brake.
Q: How is the electrical connection configured for the MKD071B-061-KP0-KN-SA001?
A: The electrical connection for the MKD071B-061-KP0-KN-SA001 is configured on Side B using a connection box.
