Product Description:

The MKD071B-061-GP1-KN-SA001 is a servo motor manufactured by Bosch Rexroth Indramat within the MKD Synchronous Motors series. It serves as a rotary actuator in automated lines, translating drive controller output into controlled speed and position for tooling, pick-and-place heads, or indexing tables. The synchronous motor design supports accurate acceleration, deceleration, and holding behavior when paired with a compatible drive controller. By combining an integrated position sensor with a compact mechanical interface, the motor supports multi-axis machinery that requires repeatable motion and efficient installation.

A concentric pilot of 95 mm centers the housing inside the machine frame, while a square flange sized at 115 mm provides the bolt pattern that carries radial and axial loads. During static operation, the electromagnetic package delivers 8.0 Nm of continuous standstill torque, which provides baseline holding force for slow-moving or position-locked cycles. When power is removed, a spring-applied brake supplies additional holding capability with 5 Nm of mechanical locking torque. Rotor angle is tracked by resolver feedback, allowing the drive controller to reconstruct position after a homing routine and command sinusoidal current that helps minimize torque ripple.

Cabling is routed on Side B of the frame and terminates inside a sealed connection box. This arrangement keeps power and feedback leads away from moving machine members and helps simplify cable routing in compact equipment. A shaft with keyway transmits torque to pulleys or couplings without slipping under normal load. Internally, winding code 061 matches the motor's impedance and thermal characteristics to standard 300 VDC drive modules, supporting stable electrical operation across typical servo duty cycles.