MKD071B-035-KP0-KN-SA001
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat MKD071B-035-KP0-KN-SA001 is a servo motor from the MKD Synchronous Motors series. It has a flange size of 115 mm, a centering diameter of 95 mm, and provides a continuous torque at standstill of 8.0 Nm. The motor features resolver feedback with an integrated encoder for absolute position detection and is equipped with a shaft with keyway and shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD071B-035-KP0-KN-SA001 is a brushless servo motor produced by Bosch Rexroth Indramat within the MKD Synchronous Motors series. It converts command signals from a drive controller into controlled rotary motion for positioning, feed, or spindle axes in automated machinery. Its electromechanical design focuses on repeatable torque delivery, integrated feedback, and straightforward cabinet wiring so that machine builders can maintain cycle accuracy while minimizing maintenance.
The motor develops a continuous standstill torque of 8.0 Nm, allowing it to hold loads without overheating during static positioning phases. Accurate mechanical centring is achieved through a 95 mm centering diameter, which aligns the stator with the mounting surface and limits radial run-out. A square flange measuring 115 mm sets the bolt pattern and defines the interface to gearboxes or machine frames. Power and feedback leads terminate inside a Connection box, keeping terminals protected and simplifying field replacement. Rotor position is monitored by resolver feedback with an integrated encoder, providing sine-cosine signals that the drive converts to absolute shaft angle for closed-loop control.
All auxiliary features support reliable integration. Electrical conduits exit on Side B, so cable routing stays clear of the driven shaft and its shaft with keyway coupling. The unit is supplied without a holding brake; machines requiring static locking must apply external clamping or active torque from the drive. Motion reference remains trustworthy thanks to absolute position detection over 4096 revolutions, eliminating the need for homing after power cycles. A positive shaft seal prevents lubricants or coolants from entering the bearing area, while winding code 035, motor size 071, and length designation B specify electromagnetic density and housing depth for accurate drive-selection calculations.
