Product Description:

The MKD071B-035-GP0-KN-SA001 is a brushless servo motor manufactured by Bosch Rexroth Indramat for the MKD Synchronous Motors series. It provides controlled torque and speed to automated machine tools, packaging stations, and indexing axes. A compact frame and resolver interface let the drive close velocity and position loops quickly, enabling repeatable rotary moves in demanding industrial cycles.

Mechanical coupling is handled through a 115 mm square mounting flange supported by a Side B cable exit, allowing the motor to fit tight cabinet layouts while keeping the connection box accessible. The grounded steel shaft follows a shaft with keyway profile so torque is transferred to pulleys or couplings without slip. The rotor can deliver a continuous standstill output of 8.0 Nm, giving drive designers a predictable thermal load during static holding or low-speed moves. Motion feedback comes from resolver feedback, which supplies analog sine-cosine signals to the drive and maintains accuracy over wide temperature swings.

A centering pilot of 95 mm aligns the flange with gearboxes, and winding code 035 defines the resistance and inductance pairings expected by MKD controllers. Because the motor is supplied without a holding brake, vertical axes must use an external brake or sustained inverter torque when power is removed. A fitted shaft seal blocks coolant or dust ingress at the output end, while the sealed connection box streamlines on-site wiring. Relative position detection matches the resolver signals, the B-length housing balances inertia against footprint, and the 071 frame size standardizes bolt circle dimensions across this segment of the MKD range.