Product Description:

The MKD071B-035-FG0-KN is a motor from the MKD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It interfaces with digital drive platforms to supply commanded motion to conveyor segments, pick-and-place arms, and other axes in automated cells. The permanent-magnet design enables quick torque buildup, supporting precise positioning and repeatable cycles in demanding production lines. This operating style suits transfer systems that require consistent timing through frequent starts, stops, and direction changes.

A centering diameter of 95 mm aligns the housing to the machine frame, while a square flange pattern of 115 mm provides rigid mounting points at the machine interface. The electromagnetic package generates a continuous standstill torque of 8.0 Nm, allowing the axis to hold static loads without overheating during normal duty. The housing has an IP65 protection category, which helps keep dust and low-pressure water jets away from internal components. Power and feedback conductors exit on side B, which helps keep cables clear of the load side. An integrated connection box provides screw terminals that simplify wiring and strain relief.

Thermal endurance is supported by insulation class F, permitting winding temperatures well above ambient without dielectric breakdown. The motor operates reliably within an ambient range of 0–40 °C, allowing installation in standard factory spaces without forced enclosure cooling. Winding code 035 identifies the electrical resistance and inductance set used by compatible drive modules for efficient current utilization. The B build length balances torque density against mass, and the 071 frame size keeps the overall envelope compact for multi-axis clusters. A plain shaft with a shaft seal transmits torque to couplings or gearboxes, and because the motor has no holding brake, the load must be secured by an external mechanism during power-off conditions.