MKD071B-024-GP1-KN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911328067
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKD071B-024-GP1-KN is a servo motor from the MKD Synchronous Motors series featuring a 115 mm flange size and 95 mm centering diameter. It provides 8.0 Nm continuous torque at standstill, includes a holding brake with 5 Nm torque, and is equipped with resolver feedback for position detection. The motor has IP65 protection, insulation class F, and a shaft with keyway and seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD071B-024-GP1-KN is a servo motor produced by Bosch Rexroth Indramat and assigned to the MKD Synchronous Motors series. In automated packaging stations, pick-and-place units, and general handling modules, this motor supplies closed-loop torque and speed so that axes can follow controller commands with minimal position error. Its synchronous design supports repeatable motion on indexing, transfer, and handling axes where the drive must regulate both speed and torque. This makes it suitable for equipment that depends on accurate acceleration, deceleration, and repeatable stopping. The winding code 024 and the B length variant match the motor to compatible MKD drives that supply the appropriate voltage and current profile.
The housing uses a flange that measures 115 mm square, and the spigot maintains concentricity with a centering diameter of 95 mm. Power and feedback conductors exit on Side B through a sealed connection box, which simplifies routing inside compact cabinets and helps keep the cable path clear of moving machine parts. When the stator windings receive rated current, the rotor can deliver a continuous standstill torque of 8.0 Nm, which is the maximum static load the axis can hold without external cooling. Rotor position is measured by resolver feedback, which enables sinusoidal commutation and stable speed regulation across the operating range.
An integrated holding brake supplies 5 Nm of static torque, preventing axis drift whenever input power or the enable signal is removed. The aluminum enclosure meets the IP65 protection category, so dust ingress is blocked and water jets will not affect internal components. Reliable operation is specified between 0–40 °C, allowing installation in typical factory environments without supplemental cooling hardware. Shaft motion is transferred through a keyed output shaft sealed by a radial lip to retain lubricant and exclude contaminants, and insulation class F materials resist winding temperatures up to 155 °C. Closed-loop positioning accuracy is maintained within ±8 angular minutes, supporting repetitive tasks that require tight mechanical synchronization.
Frequently Asked Questions about MKD071B-024-GP1-KN:
Q: What is the continuous torque at standstill for the MKD071B-024-GP1-KN motor?
A: The MKD071B-024-GP1-KN provides a continuous standstill torque of 8.0 Nm.
Q: Does the MKD071B-024-GP1-KN servo motor have a holding brake?
A: This motor includes a holding brake with a braking torque of 5 Nm.
Q: What type of encoder feedback is used for position detection on the MKD071B-024-GP1-KN?
A: Position detection on this model uses resolver feedback (RSF) and provides relative position information.
Q: What level of environmental protection does the MKD071B-024-GP1-KN provide?
A: The MKD071B-024-GP1-KN is rated at protection category IP65, shielding it against dust and water.
Q: What type and direction of electrical connection does the MKD071B-024-GP1-KN have?
A: The connection direction for this model is Side B, and it features a connection box for wiring.
