MKD041B-144-GP0-KN-SA001 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R985000721
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKD041B-144-GP0-KN-SA001 is a servo motor from the MKD Synchronous Motors series featuring a continuous torque at standstill of 2.7 Nm and a resolver feedback encoder. It has an 82 mm flange size, a centering diameter of 50 mm, and comes with a shaft with keyway and a shaft seal. This motor uses a connection box for side B connections and does not include a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD041B-144-GP0-KN-SA001 is manufactured by Bosch Rexroth Indramat within the MKD Synchronous Motors series. It is a compact servo motor intended for controlled rotary motion in automated equipment. In tooling systems, pick-and-place gantries, and indexing tables, it converts drive current into repeatable movement so axes can hold position or change position accurately during normal machine cycles. Its compact format also helps it fit installations where available mounting space is limited.
The motor provides 2.7 Nm of continuous torque at standstill, allowing stable force output for static holding or low-speed feed tasks. An 82 mm flange forms the mounting interface for standard gearboxes or machine frames, and the 50 mm centering diameter keeps the housing concentric to the driven load. The output uses a shaft with a keyway, which gives a positive mechanical lock to pulleys or couplings and helps prevent slippage during acceleration. The stator uses winding code 144, which corresponds to the electrical resistance and inductance values expected by the compatible drive. Motor size 041 with length code B balances inertia and power density, and the unit uses relative position detection, so incremental feedback from its internal transducer is referenced through a homing routine after power-up. This arrangement supports accurate startup alignment before normal operation begins.
Cabling enters a sealed connection box that is mounted on side B of the housing, which helps with right-angle routing in tight cabinets and keeps terminals protected from oil spray. Rotor angle is reported through resolver feedback, which remains accurate over wide temperature swings and resists electrical noise near welders or high-power inverters. This feedback method supports stable speed control and dependable position tracking when the motor is paired with a suitable drive. The motor comes without a holding brake, so applications that need static braking require an external device. A fitted shaft seal helps keep coolant or dust out of the bearing region, and the keyed shaft profile also supports repeatable hub removal during routine service.
Frequently Asked Questions about MKD041B-144-GP0-KN-SA001:
Q: What encoder type is used in the MKD041B-144-GP0-KN-SA001 motor?
A: This model comes equipped with resolver feedback (RSF) for position detection, providing relative position information.
Q: What is the continuous torque at standstill for the MKD041B-144-GP0-KN-SA001?
A: The MKD041B-144-GP0-KN-SA001 servo motor has a continuous standstill torque of 2.7 Nm.
Q: What is the shaft configuration of the MKD041B-144-GP0-KN-SA001?
A: The shaft on this motor features a keyway and includes a shaft seal, helping to prevent contaminants from entering the motor.
Q: Does the MKD041B-144-GP0-KN-SA001 include a holding brake?
A: This version is manufactured without a holding brake.
Q: Which direction and type of electrical connection does the MKD041B-144-GP0-KN-SA001 use?
A: The electrical connections for this model are on Side B using a connection box.
