MKD041B-143-KG1-KN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911295463
The Bosch Rexroth Indramat MKD041B-143-KG1-KN is a servo motor from the MKD Synchronous Motors series featuring a flange size of 82 mm and a centering diameter of 50 mm. It provides continuous torque at standstill of 2.7 Nm and includes a resolver feedback with integrated encoder and an absolute position detection of greater than 4096 revolutions. The motor is equipped with a holding brake that delivers 2.2 Nm of torque and is rated for the IP65 protection category.
Internal Product Review
The MKD041B-143-KG1-KN is a servo motor with IP65 protection. Resolver feedback with an integrated encoder and absolute position detection beyond 4096 revolutions support accurate motion control and consistent startup performance. Continuous standstill torque of 2.7 Nm and a 2.2 Nm holding brake make the motor a very capable choice for precision axis applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD041B-143-KG1-KN is a servo motor produced by Bosch Rexroth Indramat as part of the MKD Synchronous Motors series. In automated machinery, it serves as an electromechanical actuator that delivers controlled torque and speed under drive command, enabling coordinated motion in packaging lines, gantry stages, and robotics. Size code 041 and length code B give the motor a compact form that fits multi-axis layouts where installation space is limited. That footprint is useful where several servo axes are mounted close together on transfer systems or small machine modules.
Its mounting interface uses a 82 mm flange size and a 50 mm centering diameter, allowing straightforward alignment against gearboxes or machine frames. Power and feedback conductors are routed on Side B through a connection box, which helps keep cable routing organized when cabinets are located behind the motor. A plain shaft with a fitted seal helps block dust and spray, while the housing meets IP65 for use in washdown or particulate areas. The stator winding identified by 143 sets resistance and inductance values that match MKD drives. Continuous stall output reaches 2.7 Nm, so the axis can hold static loads without external gearing. Insulation class F supports winding temperatures up to 155 °C during normal operation.
For static safety, the motor includes a holding brake that provides 2.2 Nm of holding torque when the drive is disabled. Rotor position is measured with a resolver feedback package, and the feedback system reports absolute data over more than 4,096 revolutions, enabling homing-free startup. The internal mechanics achieve ±8 angular minutes of system precision, which supports mid-level positioning accuracy in pick units or index tables. Thermal and component limits are respected when the surrounding air is maintained between 0–40 °C.
