MKD025B-058-KG1-KN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911299893
The Bosch Rexroth Indramat MKD025B-058-KG1-KN is a servo motor from the MKD Synchronous Motors series and features a plain shaft with shaft seal and a flange size of 54 mm. It provides a continuous torque at standstill of 0.9 Nm, has a holding brake with 1 Nm torque, and uses resolver feedback with an integrated encoder for absolute position detection. The motor is protected to IP65, has a centering diameter of 40 mm, and is built to insulation class F standards.
Internal Product Review
The MKD025B-058-KG1-KN is a Bosch Rexroth Indramat servo motor with IP65 protection and resolver feedback with an integrated encoder. Absolute position detection beyond 4096 revolutions and system precision of ±8 angular minutes support accurate closed-loop motion in demanding automation axes. A 1 Nm holding brake adds dependable axis retention, making the motor a strong choice for precise servo applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD025B-058-KG1-KN is a servo motor produced by Bosch Rexroth Indramat within the MKD Synchronous Motors series. It is intended for industrial automation tasks that require precise electromechanical conversion on feeders, small gantries, and indexing tables. By supplying commanded torque and speed to the drivetrain, the motor helps the controller position loads quickly and repeatably in a closed-loop motion system. That makes it suitable for compact machine modules where accurate starts, stops, and short motion cycles are important. Its compact frame supports installation in tight machine spaces where larger servo motors would be harder to place.
A flange diameter of 54 mm suits compact mounting faces and miniature gearboxes. At standstill, the motor can deliver a continuous torque of 0.9 Nm, and the integral brake provides 1 Nm to hold the axis when power is removed. This combination supports use on small axes that need stable holding without a large mechanical envelope. Housing seals and molded connectors support an IP65 rating, which helps keep out dust and low-pressure water jets. Motion accuracy is supported by a closed-loop error band of ±8 angular minutes. Cabling enters on side B through a connection box, and class F insulation allows winding temperatures up to 155 °C. The motor also has length code B, size 025, and a plain shaft for torque transmission.
A centering pilot of 40 mm keeps the flange aligned to the machine face during mounting. The permissible ambient range is 0–40 °C, which supports normal operation without excessive thermal rise. Integrated feedback supports position tracking beyond 4096 revolutions, reducing the need for repeated homing after power cycles. The winding code 058 matches the motor's electrical characteristics to the connected drive and helps maintain smooth low-speed operation. A factory-installed shaft seal is also present to help protect internal components during extended duty.
