Product Description

The MHD115C-035-PP0-AN synchronous motor manufactured by Bosch Rexroth portrays a housing that supports liquid cooling as well as natural convection. The motor is widely deployed in machine tools. The product renders maintenance-free operation. The device features a brushless design. It encompasses grease-lubricated bearings for its entire service life. The unit depicts a length code of C. This motor is to be handled after reading and understanding the appropriate safety instructions. The product operation should be carried out only in the explicitly specified configuration and combination of components. The device is to be used only with spare parts and accessories approved by the manufacturer.

This motor does not support operation underwater. The product operation must be done only along with the manufacturer’s drive controller. The controller tends to have very hot housing during operation. The synchronous motor must be correctly and properly operated, transported and stored for safe and optimum operation. This device must not be operated even for a brief period without a permanent connection of the ground wire to the specified points. The unit can cause dangerous movements of the controller due to defective components or incorrect wiring of cable connections.

The motor has a flange size of 192mm. The product is integrated with an encoder system that helps the drive controller to position the motor and control its speed. This encoder implements digital servo feedback, with absolute position detection and more than 4,096 revolutions. The synchronous motor features a radial shaft sealing ring for its shaft. The product comprises a continuous torque of 70Nm when the cooling is at 60K through natural convection. The device is highlighted by a B05 design as per EN 60034-7 specifications. The unit comprises an overall length of 522mm. This synchronous motor has a one-year warranty and can be sent to any address irrespective of the country you live in.