Product Description

The MHD115C-024-PP0-LA synchronous motor offered by Bosch Rexroth has a time constant of 100 minutes with natural convection cooling style. This motor should not be used without a drive controller. The product is ideal for use in adverse environmental conditions. The device portrays high-performance data and high dynamics. The unit encompasses a torque to inertia mass ratio. Its electrical connection points must never be touched when the motor is turned ON. The motor incorporates a simple and quick startup process because of the data memory in its encoder. The product supports installation both horizontally and vertically.

The device features both electric commutation and electronic commutation. The unit has 1.65Nm/A torque constant, 150V/1000min-¹ voltage constant and 0.185 winding resistance at 20°C. It has a peak torque that is utilizable over a vast speed range. The output direction associated with the power connector of the motor is to its left side. The product has a low inertia mass. This device is not intended to be used if there is extreme temperature variation. The unit must be worked on after some time of it being switched OFF so that it cools down completely. Its rotor has 138 x 10^-4 kgm² moment of inertia.

This motor should be stored and transported between -20°C and 80°C in only the horizontal orientation. The product portrays a Class F insulation as per DIN VDE 0530 Part 1 specifications. The device comes with a prime black RAL 9005 varnish for its housing. This varnish is resistant to diluted lyes and acids as well as chalking, weather and coloring. The unit must not have fluid accumulation on its output shaft when it is installed vertically with the shaft upward. This device is associated with a warranty period of one year and is transported in custom military-grade packaging to avoid damage during transit.