Product Description

The MHD115C-024-PP0-BN synchronous motor has a windings code of 024. This Bosch Rexroth motor has an integrated multiturn absolute encoder that implements digital servo feedback. The product houses a keyway shaft with a shaft sealing ring and is designed as per DIN 6885-1 specifications. The output direction pertaining to the angular encoder connector of this device can be turned by 90°. The unit should be mounted and aligned correctly before its startup. Its electrical connections must be established as per the specifications and the cable screw unions have to be tightened properly. The motor has to be kept clean to prevent its failure.

The product is to be cleaned periodically or at regular intervals to ensure that it is free of excessive shavings, dust or dirt that may affect its functionality. The device features a weight of 55kg without a cooling fan. The unit supports a maximum speed of 4,000min^-1. It has a rated torque of 26Nm when it is cooled by natural convection at 100K. The motor is deployed in handling and automation systems. This product has grease-lubricated bearings for its entire service life. This device depicts a completely closed motor design. The unit permits continuous start-stop operation.

The motor makes use of special magnetic materials to design its permanent magnets that support electronic commutation. The product is intended to be put to use without any structural changes. The device may be assembled, mounted, installed and used only under the environmental conditions listed by the manufacturer. The unit must never be operated when there is high-temperature fluctuation. It tends to have a high discharge current if it is not used as intended. The motor should not be touched during or soon after operation. This MHD115C-024-PP0-BN motor with warranty support for one year can be delivered across the globe through logistics partners with a worldwide presence.