Product Description

The MHD115C-024-PG1-BN synchronous motor offered by Bosch Rexroth is characterized by high overload capability and high dynamics. The motor has a favorable torque to inertia mass ratio. The product has a multiturn absolute encoder that implements digital servo feedback. This device can be installed in any position. The unit has the capability of rendering continuous start-stop operation with high repeat frequencies because of electrical commutation. It may be required to incorporate additional sensors and actuators to control and monitor the motor. The product must make use of only spare parts, cables and accessories that have the approval of the manufacturer.

This device depicts an ideal heat dissipation from the windings of the stator to the exterior wall of the motor housing. The unit supports operation as both servo and main drive motors. It is used in printing, packaging as well as paper and food processing machines. The motor bearing has been designed to be able to withstand high radial loads. This product encompasses a rated torque of 26Nm and a rated performance of 6.6kW at 60K with natural convection support. The housing of this device supports liquid cooling apart from natural convection. The flange socket of the cover of the unit can be replaced with appropriate sealing air connectors.

The motor is meant to be mounted only after checking all its components for cleanliness and damage. The product is to be stored and/or transported between -20°C and 80°C. The electrical connections of this device are to be established only after its mechanical mounting has been done. Its plug connectors should be connected as well as disconnected only in the dry and de-energized state. The unit has to be connected as per the circuit diagram of the supporting machine. This synchronous motor with warranty support for one year is dispatched in custom military-grade packaging to avoid transit likely damage.