Product Description

Bosch Rexroth is the world leader in the creation of energy-efficient and long-lasting products that provide excellent value to consumers. Synchronous motors, spindle motors, servo motors, brake choppers, and drive controllers are among the goods offered.

The MHD115B-058-NP0-RA model due to its high protection rating of IP65 and insulation level of F may be used in unfavorable situations. The motor's power connection is located on the right side of the motor housing, and it has a key output shaft with a sealing ring installed to keep lubricants in place. The MHD115B synchronous motor produces a constant torque of 75 Nm at 60/100K (surface cooling) and consumes a continuous current of 93.3 A at the same temperature. This synchronous motor weighs 40 kg unattached and has a winding resistance of 0.11 ohms and a winding inductance of 1.6 mH. The model housing has an additional layer of black paint with a maximum layer thickness of 40 micrometers and is intended to accommodate both natural and surface cooling. This MHD115B synchronous motor’s thermal time constant is predicted to be 45 or 100 minutes, depending on the cooling technique used during operation.

The model MHD115B-058-NP0-RA contains digital servo feedback as motor feedback and has a moment of inertia of 93.2 x 10^-4 kgm². At 20 degrees centigrade, the motor has a voltage constant of 81.8 V/1000min-1 and a torque constant of 0.9 Nm/A. The synchronous motor has a maximum speed of 6000 revolutions per minute and a maximum torque of 160 Nm. During natural cooling, the motor uses a rated current of 30 A and provides a rated torque of 33.8 Nm. Wake industrial stocks this item (MHD115B-058-NP0-RA) and can expeditiously transport it to your specified place.