Product Description

The MHD115B-024-PP1-AA synchronous motor delivered by Bosch Rexroth features a 70Nm electrically releasing holding brake. The motor must have proper grounding before it is started. The product should also be checked for the operational reliability of its holding brake before the startup. The device can be operated with the related drive controller only after establishing the connections correctly. The functionality of this unit may get adversely affected due to excessive shavings, dust or dirt. The motor cooling ribs have to be cleaned at regular intervals for large heat radiation. The product may have reduced bearing service life if it is operated at very high temperatures.

A motor inspection must be carried out at regular intervals for damaged connection lines. The device check should also be done for the tight seating of its connectors. Its bearings have to be replaced when they produce noise when running or their service life has been reached. This unit comes with a rated performance of 4.4kW. Its holding brake must be checked for proper functionality only after de-energizing the motor and securing it against re-energization. The product comprises protection against overload due to its temperature monitoring functionality. This MHD115B-024-PP1-AA motor is available with backup support for one complete year and is transported to any location.

The device features peak torque that can be used across a wide speed range. The unit also has high dynamics and high overload capability. It has a favorable torque to inertia mass ratio. The motor portrays ideal heat dissipation from the windings of its stator to the external wall of its housing. This product incorporates electrical as well as electronic commutation. The device features permanent magnets designed using special magnetic materials for low inertia mass. The unit supports the mounting of belt pulleys and pinions directly over it. Its bearings can withstand high radial loads.