Product Description

The MHD115B-024-PG1-RA synchronous motor works along with a digital drive controller. The Bosch Rexroth motor is widely used in the printing and paper industries. The product is noted for its high operational reliability. This device has a peak current rating of 145A. The unit is integrated with a multiturn absolute encoder that renders digital servo feedback. It has to be used in the original state without any structural changes or hardware modification. The motor might require additional sensors and actuators to be included to control and monitor it. The product does not support operation underwater. The device is meant to be put to use by people qualified and trained to turn ON and OFF electrical equipment.

The motor is used with a drive controller that is to be installed in commercial machinery. The product may cause dangerous drive controller movements at any point in time due to defective components or wrong inputting of parameters before operation. This device should not be in the pressurized state when it is being disassembled. The flange of the unit has a centering diameter of 180mm. The encoder associated with the synchronous unit features over 4,096 revolutions. The output direction of the power connector in this motor is to its left side.

The device has four pole pairs. The unit has the capability of rendering maintenance-free operation. It can be fitted with a blower or a fan if needed. The B05 design, as per EN 60034-7 specifications, allows the motor to be installed in the preferred position. The product allows the attachment of planetary gearings with low-play gear teeth and minimum reverse play. This device has separate plug connections for its feedback connector and power connector. The unit supports connectivity with a blower plug using a 0.75mm² cross-section three-core cable. This MHD115B-024-PG1-RA motor comes with a warranty tag for one year and can be delivered to any country.