Product Description

The MHD095C-058-PG0-BN is a synchronous motor. It is part of the MHD product line from Bosch Rexroth. The motor housing is designed for natural convection and surface cooling. The permitted ambient temperature range is 0 to 40 degrees Celsius. For storage the permitted temperature range is-20 to 80 degrees Celsius. The motor should only be stored in the horizontal position. The plastic protective sleeve on the drive shaft should not be removed during storage as it protects the shaft form moisture and mechanical damage. During transport the motor should be kept in the horizontal positon and lifted with cranes and sling belts. The MHD095C-058-PG0-BN includes a type label. The information on the label is provided for equipment identification. The MHD095C-058-PG0-BN supports digital servo feedback through an integrated encoder.

The motor gets power through a connector that is located on side B of the motor housing. Other motor features include plain shaft with sealing ring, and a housing that is suited to surface cooling and natural convection. A holding brake, if required, needs to be ordered separately. The rated speed of the MHD095C-058-PG0-BN motor is 2000 RPM and the maximum speed is 6000 RPM. The theoretical maximum torque is 88 Nm. The continuous torque at standstill is 21 Nm and the continuous current at standstill is 26 Amps. The rated torque is 8.4 Nm and rated current is 7.4 Amps. The peak motor current is 117 Amps. Bosch does not recommend installation of the MHD095C-058-PG0-BN at altitudes that exceed 1000 meters above sea level. Degree of protection provided by the motor housing is IP65. The motor insulation class is F. Number of pole pairs on the MHD095C-058-PG0-BN motor are four.