Product Description

The Bosch MHD093C-058-NG2-BA is a synchronous servo motor. It belongs to MHD product range that is highly suited to cost-effective automation systems. The combination of a MHD motor and a compatible drive controller is typically used for handling, machine tools, automation and packaging applications. The maximum motor speed is 6000 RPM and the characteristic speed is 4000 RPM. The rated speed varies with cooling method used: it is 2000 RPM with natural convection at 60 K overtemperature, 3500 RPM with natural convection at 100 K overtemperature, and 3500 RPM with surface cooling at 60 / 100K overtemperature. The continuous torque at standstill varies with cooling method used: it is 23 Nm with natural convection at 60 K overtemperature, 28 Nm with natural convection at 100 K overtemperature, and 34.5 Nm with surface cooling at 60 / 100K overtemperature.

The continuous current at standstill varies with cooling method used: it is 28.3 Amps with natural convection at 60 K overtemperature, 34.5 Amps with natural convection at 100 K overtemperature, and 42.5 Amps with surface cooling at 60 / 100K overtemperature. The motor housing is designed for natural convection and surface cooling. The motor power connector is on side B of the housing. The maximum recommended power wire cross-section varies with cooling method: it is 2.5 mm² with natural convection at 60 K overtemperature, 2.5 mm² with natural convection at 100 K overtemperature, and 6 mm² with surface cooling at 60 / 100K overtemperature. Features that are available on the MHD093C-058-NG2-BA are plain shaft with sealing ring, digital servo feedback and 32 Nm holding brake. Protection category of the MHD093C-058-NG2-BA motor is IP65. Weight of the MHD093C-058-NG2-BA is 23.5 kilograms.