MHD093B-035-NP0-AA

Product Description

The Bosch MHD093B-035-NP0-AA is a MHD series motor. From the type code, the frame size of the motor is 093 and corresponds to a flange size of 140 / 150 millimeters.  The motor supports digital servo feedback. This features allows the motor to provide feedback to the connected drive controller. The feedback enables the drive controller to ensure that the motor operating parameters closely match the desired parameters. The main shaft on the MHD093B-035-NP0-AA has a key as per DIN 6885-1. The main shaft also has a sealing ring that helps to protect the motor bearings from contaminants present in the operating environment. Characteristic speed of the motor is 3000 RPM. The rated speed of the motor for the 60 K overtemperature condition with natural convection is 2500 RPM. The rated speed of the motor for the 100 K overtemperature condition with natural convection is 2500 RPM.

The rated speed of the motor for the 60 K overtemperature condition with surface cooling is 2500 RPM. The maximum speed of the MHD093B-035-NP0-AA motor is 4500 RPM. The housing of the motor is IP65 rated.  The maximum setup height allowed by Bosch with rated data is 1000 meters. The permissible ambient temperature range for operation with rated data is 0 to 40 degrees Celsius. The permissible ambient temperature range for storage is -20 to 80 degrees Celsius. The MHD093B-035-NP0-AA does not have a holding brake. However the holding brake is an optional feature that can be ordered if required. The motor power connector is located on side A. The motor housing is designed for natural convection or surface cooling. Mass of the MHD093B-035-NP0-AA motor is 19 kilograms.