MDD115D-N-020-N2L-130GB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911288028
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
58 Seconds
The Bosch Rexroth Indramat MDD115D-N-020-N2L-130GB2 is a motor from the MDD Synchronous Motors series designed for digital drive controllers. It features a continuous torque at standstill of 57 Nm and comes with a holding brake that provides 60 Nm of torque. The motor has a centering diameter of 130 mm, a nominal speed of 2000 rpm, and uses digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD115D-N-020-N2L-130GB2 synchronous servo motor is built by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into controlled mechanical torque for axes that require closed-loop speed and position regulation in industrial automation. Position and speed data are returned through the integrated Digital servo feedback (DSF) interface, so the controller can correct deviations quickly during acceleration, deceleration, and steady running. That makes the motor suitable for synchronized production equipment where axis timing must remain consistent under changing loads.
At standstill, the motor can deliver 57.0 Nm of continuous torque, so the axis can hold or slowly index substantial loads without excessive heat rise in the windings. Under rated operating conditions, the rotor reaches 2000 rpm, giving the drive a predictable operating speed for coordinated multi-axis movement. For emergency or power-off clamping, it carries a blocking brake that supplies 60.0 Nm of static locking torque. Power and feedback conductors exit on side B through a single industrial connector, and the housing and rotor are balanced to a standard grade to help reduce vibration as shaft speed changes.
Mechanical alignment is handled by the 130 mm centering pilot, which fits common flange patterns and helps maintain accurate coaxial alignment with gearboxes or mounting plates. The drive end uses a plain shaft finished to ISO tolerances, while a fitted shaft seal helps prevent lubricant or coolant from entering the stator cavity during washdown cycles. Frame designation 115 with the D length code gives the motor a longer active stack without changing the external height, which increases magnetic volume and supports higher continuous torque than shorter versions in the same family. The shaft end on side A is standard, with no second shaft on side B, leaving the output end clear for couplings, pulleys, or similar transmission components.
Frequently Asked Questions about MDD115D-N-020-N2L-130GB2:
Q: Does the MDD115D-N-020-N2L-130GB2 motor include a holding brake?
A: The MDD115D-N-020-N2L-130GB2 features a blocking brake with a torque of 60.0 Nm.
Q: What is the continuous torque at standstill for the MDD115D-N-020-N2L-130GB2?
A: This motor provides a continuous torque at standstill of 57.0 Nm.
Q: What type of feedback is provided by the MDD115D-N-020-N2L-130GB2 motor?
A: Digital servo feedback (DSF) is used for motor feedback on this model.
Q: What kind of shaft does the MDD115D-N-020-N2L-130GB2 have?
A: The shaft is a plain type with a shaft seal for added protection.
Q: How is the electrical connection configured on the MDD115D-N-020-N2L-130GB2 motor?
A: The electrical connection is made via a connector facing Side B of the motor.
