MDD115D-N-015-N2M-130PB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911280855
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
4 Seconds
The Bosch Rexroth Indramat MDD115D-N-015-N2M-130PB2 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor features a continuous torque at standstill of 57 Nm and a nominal speed of 1500 min⁻¹. It comes with an integrated multiturn absolute encoder, a blocking brake with 60 Nm holding torque, and digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD115D-N-015-N2M-130PB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts commanded current into precise mechanical rotation for positioning tasks in automated lines, gantry axes, and similar motion systems. The motor is suited to applications that require controlled acceleration, repeatable stopping, and stable low-speed operation. Typical duties include indexing tables, transfer systems, and feed axes that must maintain position accuracy through repeated start-stop cycles. Because the motor is intended for servo operation, it responds quickly to current commands and supports smooth coordination with other controlled axes.
This model produces a continuous standstill torque of 57.0 Nm, allowing static load holding without overheating. During motion, it reaches a nominal shaft speed of 1500 rpm, which is the base speed available under rated voltage and frequency. A blocking brake is integrated, and its stopping torque is rated at 60.0 Nm, so vertically loaded axes can remain secure when power is removed. Rotor position is reported by an integrated multi-turn absolute encoder, and the drive receives position data through digital servo feedback for closed-loop regulation. A 130 mm pilot diameter centers the motor accurately on the machine flange and helps maintain concentric alignment.
The motor uses a keyway shaft for positive torque transfer to pulleys or couplings, and a shaft seal is fitted to help limit the entry of coolant or lubricant. Power and feedback connections are routed through a connector on Side B, which can simplify cable runs in machine layouts where the non-drive end faces the cabinet. This arrangement is useful where the shaft end couples directly to a gearbox or belt drive, and where protected bearings are important in lightly contaminated industrial spaces. The housing follows the standard version for this motor platform, and the rotor stack uses length code D. The unit is built in Motor Size 115, which places it within the 115-frame envelope used for compatible mounting parts and flange interfaces.
Frequently Asked Questions about MDD115D-N-015-N2M-130PB2:
Q: What type of encoder is included in the MDD115D-N-015-N2M-130PB2 motor?
A: The MDD115D-N-015-N2M-130PB2 motor features an integrated multiturn absolute encoder for accurate position tracking.
Q: What is the continuous torque at standstill for the MDD115D-N-015-N2M-130PB2?
A: This model provides a continuous torque of 57.0 Nm at standstill for sustained load handling.
Q: How much holding brake torque does the MDD115D-N-015-N2M-130PB2 supply?
A: The holding brake on the MDD115D-N-015-N2M-130PB2 offers 60.0 Nm of torque for safe stationary holding.
Q: What is the shaft type on the MDD115D-N-015-N2M-130PB2?
A: This motor is equipped with a shaft type featuring a keyway for secure mechanical connection.
Q: What is the connection direction of the MDD115D-N-015-N2M-130PB2 motor?
A: The connection on this motor is a side B facing connector, simplifying electrical installations.
