Product Description:

The MDD115D-F-015-N2L-130PA2 is an AC synchronous motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It interfaces directly with digital drive controllers, converting commanded current into controlled rotary motion for industrial axes that must accelerate smoothly, position accurately, and repeat cycles with minimal drift. The motor’s electromagnetic design and integrated feedback allow it to serve as the prime mover in pick-and-place modules, tooling tables, and conveyor segments found across automated assembly and packaging lines.

At standstill, the unit can deliver a continuous torque of 57.0 Nm, giving machines the force needed to hold or creep under load without thermal overload. Its nominal speed is 1500 rpm, which suits gearbox ratios and process cycle times that require stable continuous operation. The flange centers on a 130 mm pilot, ensuring rigid alignment with adjoining mechanics, and the rotor is balanced to the standard grade to limit vibration at that speed. The housing is configured for liquid cooling, so heat is removed by a closed coolant circuit rather than by ambient airflow. Real-time position is reported through digital servo feedback, giving the controller a high-resolution signal for fast correction. The electrical and feedback connectors are oriented toward Side A, simplifying cable routing within compact machine frames. Length code D identifies the stator stack depth used for this torque range.

The motor is equipped with a blocking brake that provides 60.0 Nm of static holding torque, allowing vertical axes to remain locked when the drive is disabled. Output power is transmitted through a shaft machined with a keyway, and a shaft seal is present to keep coolant and contaminants away from the bearings. Because the design omits a side-B extension, the shaft end remains standard and clears nearby components. Power and feedback are fed through a front-mounted connector, which allows connection without rerouting cabinet wiring. The frame designation of 115 matches other motors in the MDD family and keeps mounting dimensions consistent across different torque ratings.