Product Description:

The MDD115C-F-030-N2L-130GA0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to work with digital drive controllers, it delivers controlled torque and speed for positioning tables, packaging stations, and feed axes where consistent motion and rapid response are required in automated machinery. Command signals return through digital servo feedback, which provides rotor position data for closed-loop control. This feedback supports stable speed and position regulation.

At standstill, the motor can generate 47.0 Nm of continuous torque, giving machines enough holding force for precise low-speed tasks. Its rated mechanical velocity is 3000 rpm, which matches high-speed production cycles driven from standard inverter frequencies. The housing is prepared for liquid cooling, so thermal energy is removed through a coolant jacket rather than ambient air, allowing prolonged full-load operation inside sealed cabinets. Accurate shaft alignment is supported by a centering diameter of 130 mm, which fits standardized mounting pilots. Power and feedback are routed through a single connector, simplifying cabling in modular machines. The unit is supplied without a blocking brake, so applications that need static holding torque must rely on external clamping or drive torque when power is removed.

Mechanical integration is simplified because the electrical and feedback terminations face Side A, keeping service loops on one face of the machine. The rotor is balanced to the standard grade, limiting residual vibration that could affect sensor readings during operation. A plain shaft with a shaft seal accepts couplings or pulleys while helping prevent lubricant leakage. The motor has a size code of 115 and a motor length code of C, which correspond to the active iron volume in this frame. The standard shaft end without a side B extension saves axial space.