MDD115A-N-015-N2L-130PB0
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911261325
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MDD115A-N-015-N2L-130PB0 Servo Motor is manufactured by Bosch Rexroth Indramat. This unit operates with a 1500 Min nominal speed, Digital Servo Feedback, a(n) Output Shaft with Keyway, and it is Not Equipped with a blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD115A-N-015-N2L-130PB0 Bosch Rexroth digital AC servomotor cannot be used without a drive controller. This servomotor is helpful for cutting at high-speed ranges. The product deploys digital servo feedback. This device is used in roller feeds. The unit features permanent magnets in its rotor. It is capable of rendering maintenance-free operation. This motor portrays high dynamics. The product houses an output shaft featuring a keyway and no blocking brake. This device has decreased output data if the ambient operating conditions are exceeded. The unit is protected against the penetration of water. Its covers and housing are designed and constructed according to DIN 40 050 guidelines.
This motor can operate at a maximum of 55°C temperature. The product has IP 65 degree of protection for its output shaft. This device incorporates a shock-damped mounting solution based on the construction of the machine in which it is installed. The unit can be installed upright with the shaft facing upward or downward. Its mounting flange has a 130mm standard pilot diameter. The motor shaft is ideal for lesser demanding applications. This product features a radial force based on its average speed as well as the point of the force application. The servomotor is available with a year’s Wake Industrial warranty.
This device has a normal balance class for normal applications. The unit has a temperature sensor in its windings. Its angle feedback connector is oriented to the B side by default. The motor pickup must be done using a crane and belts. This product should have no impact on the output shaft. The device has plastic protective covers on the output shaft and connectors. This unit is to be started only by fully trained personnel. Its lifting strap must not be wound around the shaft. The motor operating curves depict the permissible continuous torque with the S1 operating mode. This product has a 93.9A maximum current rating. The MDD115A-N-015-N2L-130PB0 servomotor dispatch takes place to any destination.
