Product Description:

The MDD112D-N-030-N5L-130GB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it works with compatible drive electronics to provide precise position and velocity control in automated machinery. This model belongs to motor size 112 and uses a standard housing, making it suitable for machine installations where reliable servo performance is required without a specialized enclosure. It is commonly used on axes that need repeatable motion, steady response, and accurate control during changing load conditions.

For mechanical integration, the flange has a centering diameter of 130 mm, which helps align the motor with the mating machine surface. Power and feedback leads exit on Side B through a pre-configured connector, which helps keep cable routing orderly in compact machine layouts. At standstill, the motor can deliver up to 38.0 Nm of continuous torque, giving the axis stable holding capability during dwell periods. During motion, the stator supports a nominal speed of 3000 rpm, allowing fast travel without pushing the winding beyond its rated operating point. Position and speed data are transmitted through digital servo feedback (DSF), which allows the controller to maintain accurate closed-loop operation and respond quickly to load changes.

An integrated blocking brake provides a holding brake torque of 40.0 Nm, which helps secure vertical or suspended loads when power is removed. The motor uses length code D, which refers to a longer housing format with greater thermal mass for sustained operation. A plain shaft is fitted for the mechanical output, and a shaft seal helps limit contamination at the bearing area. This arrangement supports dependable operation in applications with frequent starts and stops. It also helps maintain motion accuracy while reducing the chance of debris entering the shaft opening.