Product Description:

The Bosch Rexroth Indramat MDD112D-N-030-N2M-180PA0 belongs to the MDD Synchronous Motors series and pairs with digital drive controllers that regulate position and velocity in automated assembly, packaging, and material-handling stations. By translating commanded current into rotary motion, the unit delivers controlled torque for axes that must start, stop, and reverse precisely under closed-loop feedback. It is suited to servo applications that require repeatable motion during frequent cycle changes and accurate response to load variation.

At a continuous standstill torque of 38.0 Nm, the motor can hold mechanical loads without additional gearing, which is useful when vertical axes must resist gravity while energized. When the inverter drives the windings at rated electrical frequency, the shaft reaches a nominal speed of 3000 rpm, giving a broad operating range for indexing and constant-speed duties. A centering diameter of 180 mm aligns the housing to machine frames with minimal runout. Position data are generated by the integrated multiturn absolute encoder, which tracks revolutions beyond a single turn and supports startup without a homing move. The encoder transmits signals through digital servo feedback (DSF), so the associated controller receives high-resolution position data instead of analog increments, which supports stable closed-loop operation.

The enclosure is equipped with a shaft seal to limit lubricant migration when the motor is mounted to gearboxes or sealed machinery cavities. Power and feedback conductors exit on Side A, allowing cable routing toward the drive cabinet while keeping the opposite face clear. The single-ended connector arrangement allows quick connection without individual terminals. The motor is supplied without a blocking brake, which reduces inertia in applications that use electrical braking. It also has a keyway shaft, motor size 112, and length code D, which set its physical envelope for compatible machine layouts.