MDD112D-N-030-N2M-130PB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911256513
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
42 Seconds
The Bosch Rexroth Indramat MDD112D-N-030-N2M-130PB1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor features a nominal speed of 3000 rpm, a continuous torque at standstill of 38 Nm, and uses an integrated multiturn absolute encoder for precise motor feedback. It comes with a keyway shaft type, centering diameter of 130 mm, and a blocking brake with a holding torque of 14 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD112D-N-030-N2M-130PB1 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it delivers controlled rotation to position and velocity loops in automated packaging, printing, and assembly equipment. The motor is intended for machine axes that require accurate response during starting, stopping, and speed changes. A blocking brake is installed so loads can be mechanically secured whenever the drive is de-energized, which helps prevent drift on vertically loaded axes.
A centering flange diameter of 130 mm aligns the housing with machine frames, and standard balancing helps limit residual vibration at operating speed. The electrical terminations exit on Side B, and a single connector simplifies cable routing. When energized, the motor can supply a continuous standstill torque of 38.0 Nm, enabling accurate static holding without additional cooling. During motion, it reaches a nominal speed of 3000 rpm, matching high-throughput axes that require quick indexing. The integrated brake counters up to 14.0 Nm of back-driving force so suspended loads remain secure. The size code 112 and length code D indicate the larger magnetic stack used for this frame, which supports the stated torque while keeping the housing within the standard series envelope.
Position data are returned through Digital servo feedback (DSF) generated by an integrated multiturn absolute encoder, allowing the controller to read speed and multi-turn position without an external sensor. That encoder preserves absolute position across multiple revolutions, so the drive can retain shaft location information after power interruption. A factory-installed shaft seal protects the bearings from lubricant washout and airborne contaminants, and the standard housing is suitable for indoor machinery. The shaft seal also helps keep debris away from the bearing area during regular production use. Power is transmitted through a shaft machined with a keyway, while the opposite end has no shaft extension on side B, leaving the motor in a standard single-shaft configuration.
Frequently Asked Questions about MDD112D-N-030-N2M-130PB1:
Q: What type of encoder is included with the MDD112D-N-030-N2M-130PB1 motor?
A: This model features an integrated multiturn absolute encoder for precise position feedback.
Q: What is the continuous torque at standstill for the MDD112D-N-030-N2M-130PB1?
A: The continuous torque at standstill for this motor is rated at 38.0 Nm.
Q: Does the MDD112D-N-030-N2M-130PB1 motor have a holding brake and what is its torque?
A: A blocking brake with a holding brake torque of 14.0 Nm is installed in this motor.
Q: What type of shaft and seal does the MDD112D-N-030-N2M-130PB1 motor have?
A: The shaft is equipped with a keyway and a shaft seal for added security and protection.
Q: What type of motor feedback does the MDD112D-N-030-N2M-130PB1 provide?
A: This model supports digital servo feedback (DSF) for efficient motor feedback.
