MDD112D-N-030-N2L-130GB3 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911271968
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
33 Seconds
The Bosch Rexroth Indramat MDD112D-N-030-N2L-130GB3 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. It offers a continuous torque at standstill of 38 Nm and features digital servo feedback. The motor has a centering diameter of 130 mm, a nominal speed of 3000 min⁻¹, and includes a blocking brake with 60 Nm holding brake torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The industrial servo motor MDD112D-N-030-N2L-130GB3 is produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It pairs with digital drive controllers to deliver commanded torque and speed in automated machinery such as packaging stations, gantry axes, and material-handling equipment. This synchronous motor is intended for closed-loop motion where stable torque delivery and repeatable speed response are required. The unit uses a 112 frame size and supports direct integration into machine axes. Its integrated blocking brake secures loads when power is removed, while standard housing and balancing features support installation without additional dynamic compensation or special enclosures.
The motor has a centering diameter of 130 mm, which aligns the flange with adjoining equipment. Under continuous stall conditions, it produces 38.0 Nm of torque, giving strong holding capability for position-regulated processes that dwell for extended periods. During operation, it reaches a nominal rotor speed of 3000 rpm, matching common inverter output ranges used on fast indexing axes. When the machine stops, the blocking brake applies up to 60.0 Nm to prevent back-driving or drift caused by suspended loads. These values support applications that require controlled motion during operation and secure holding at standstill.
Cabling enters through a keyed connector on side B, so power and feedback plugs remain accessible without moving the motor body. This layout can simplify cable routing where space around the drive end is limited. Position and velocity data are returned through digital servo feedback, allowing the drive to close high-resolution loops without a separate feedback device. The output uses a plain shaft, which mates with clamp couplings common on modular gearboxes. Contamination at the output journal is limited by a shaft seal, helping protect the shaft area when coolant mist or light dust is present. Standard dynamic balancing limits vibration during continuous operation.
Frequently Asked Questions about MDD112D-N-030-N2L-130GB3:
Q: What is the centering diameter on the MDD112D-N-030-N2L-130GB3 motor?
A: The MDD112D-N-030-N2L-130GB3 has a centering diameter of 130 mm, aiding in precise alignment during installation.
Q: Is a holding brake included with the MDD112D-N-030-N2L-130GB3, and what is its torque?
A: This model comes equipped with a blocking brake that provides a holding brake torque of 60.0 Nm.
Q: What type of motor feedback does the MDD112D-N-030-N2L-130GB3 offer?
A: Motor feedback is provided through digital servo feedback (DSF) for reliable operation with digital drive controllers.
Q: What is the nominal speed specification for the MDD112D-N-030-N2L-130GB3?
A: The nominal speed of the MDD112D-N-030-N2L-130GB3 motor is rated at 3000 min⁻¹.
Q: What connection direction and type are featured on the MDD112D-N-030-N2L-130GB3?
A: This model uses a connector located on Side B for its electrical connection.
