Product Description:

The MDD112D-N-030-N2L-130GB2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers where closed-loop position and velocity regulation is required on automated axes such as gantry heads, tool changers, or transfer modules. The motor belongs to size 112 and length code D, uses a standard housing, and has standard rotor balancing for direct installation on precision machinery. This layout supports stable operation in applications that require repeatable motion and accurate response to changing load conditions.

This model sustains a continuous standstill torque of 38.0 Nm, allowing the axis to hold static loads without overheating when the shaft is controlled at zero speed. During acceleration or vertical holding, the integrated blocking brake supplies up to 40.0 Nm of mechanical restraint, so the load remains secure when power is removed. Rated operation occurs at a nominal speed of 3000 rpm, supporting fast axis movement in automated equipment. A centering diameter of 130 mm helps seat the motor concentrically in machine frames and reduce radial runout. Power and feedback plugs are oriented on Side B, which can simplify cable routing when the mounting face must remain unobstructed.

The wiring interface uses a keyed connector that supports secure installation without the need for loose gland hardware. Position data is returned through digital servo feedback, allowing the drive to monitor rotor motion continuously for precise control. The output uses a plain shaft with a shaft seal, which supports direct coupling through clamp sleeves or bellows couplings while helping keep contaminants away from internal components. The motor has a single shaft end, and the opposite side remains closed. It is intended for digital drive controllers and works with standard Indramat power modules for regulated motion control.